 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SIDACtor(R) Device RoHS This modified TO-220 package with Type 61 lead spacing offers a through-hole technology SIDACtor protection solution. SIDACtor devices enable equipment to comply with various regulatory requirements including GR 1089, ITU K.20, K.21 and K.45, IEC 60950, UL 60950, and TIA-968-A (formerly known as FCC Part 68). Electrical Parameters Part Number * P2000AA61L P2200AA61L P2400AA61L P2500AA61L P3000AA61L P3300AA61L VDRM Volts 180 200 220 240 270 300 VS Volts 220 240 260 290 330 360 VT Volts 4 4 4 4 4 4 IDRM Amps 5 5 5 5 5 5 IS mAmps 800 800 800 800 800 800 IT Amps 2.2 2.2 2.2 2.2 2.2 2.2 IH mAmps 150 150 150 150 150 150 * "L" in part number indicates RoHS compliance. For non-RoHS compliant device, delete "L" from part number. For surge ratings, see table below. General Notes: * All measurements are made at an ambient temperature of 25 C. IPP applies to -40 C through +85 C temperature range. * IPP is a repetitive surge rating and is guaranteed for the life of the product. * Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities. * VDRM is measured at IDRM. * VS is measured at 100 V/s. * Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request. Surge Ratings in Amps IPP Series 0.2x310 * 2x10 * 8x20 * 0.5x700 ** 2x10 ** 1.2x50 ** Amps A 20 Amps 150 Amps 150 10x160 * 10x160 ** Amps 90 10x560 * 10x560 ** Amps 50 5x320 * 9x720 ** Amps 75 10x360 * 10x1000 * 5x310 * ITSM 10x360 ** 10x1000 ** 10x700 ** 50 / 60 Hz Amps 75 Amps 45 Amps 75 Amps 20 di/dt Amps/s 500 * Current waveform in s ** Voltage waveform in s Telecom Design Guide * (c) 2006 Littelfuse 3 - 43 www.littelfuse.com SIDACtor Devices SIDACtor(R) Device Thermal Considerations Package Modified TO-220 Type 61 Symbol TJ TS RJA Parameter Operating Junction Temperature Range Storage Temperature Range Thermal Resistance: Junction to Ambient Value -40 to +150 -65 to +150 50 Unit C C C/W Capacitance Values pF Part Number P2000AA61L P2200AA61L P2400AA61L P2500AA61L P3000AA61L P3300AA61L MIN 25 25 25 20 20 20 MAX 35 35 35 35 35 35 Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. +I IPP - Peak Pulse Current - %IPP IT IS IH IDRM -V VT VDRM VS +V 100 Peak Value tr = rise time to peak value td = decay time to half value Waveform = tr x td 50 Half Value 0 0 -I tr td t - Time (s) V-I Characteristics 14 12 10 8 6 4 2 0 -4 -6 -8 -40 -20 0 20 40 60 80 100 120 140 160 tr x td Pulse Waveform Percent of VS Change - % IH (TC = 25 C) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 IH 25 C 25 C Ratio of Junction Temperature (TJ) - C Normalized VS Change versus Junction Temperature Case Temperature (TC) - C Normalized DC Holding Current versus Case Temperature www.littelfuse.com 3 - 44 (c) 2006 Littelfuse * Telecom Design Guide |
Price & Availability of P2400AA61L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |